Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 

CTS1300 Hardware Setup- Microphone test fails for 3 microphone.

When CTS 1300 has 3 microphones connected and 3 tabletop mic's configured in CUCM, the microphone test fails with the following error:
                               "Could not access calibration data. Microphone Calibration not performed"
Tested this with configuration in CUCM to be 6 table top mic's with only 3 mic's connected and the microphone test DOES NOT fail.

Part of CSCtf87238 : Found in CTS 1.6(3) and fix in 1.7(0)

Version history
Revision #:
1 of 1
Last update:
‎01-06-2011 01:58 AM
Updated by:
 
Labels (1)