Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 

CUCM & CM Intergation for VOIP

Hai,

I need to intergate CUCM (Head Office) & CM ( Branch Office) for VOIP Connectivity.

I need the Steps for intergation  of CUCM (Head Office) & CM ( Branch Office) or planing containing the implementation steps / configuration which will make this possible.

Please suggest for the same, Need to implement at the earliest.

With Regards

Murthy Kanuri



Comments

Hi Murthy,

is your branch containing Call Manager or call manager express.

if it is call manager, you need to configure inter cluster trunk.

if it is call manager express, you need to add the CME as H323 GW to the CCM at HQ. configure dial-peer voip on CME pointing to CCM

HTH

Anas

please don't forget to rate the helpful posts

New Member

Hi Anas,

Yes i need to intergate   CUCM  (Head Office) & CME ( Branch Office) for VOIP Connectivity.

Yes  I have Call Manager Express at Branch Ofice.

And my CUCM Ip is 10.9.x.x and CME ip is 10.21.x.x

And i need the implementation steps to add the CME as H323 GW to the CCM at HQ.

Please suggest.

Regards

Murthy Kanuri


372
Views
0
Helpful
2
Comments