cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
5596
Views
0
Helpful
0
Comments
Kris Thompson
Level 1
Level 1

     

     

    Configure CUPC (Cisco Unified Personal Communicator) Devices & Users


     

    This page should provide a quick path to adding CUPC Devices and Users.

     

    Environment

     

    CUCM CUP

    6.1(1)
    6.0(2)

     

    Configure CUPC Phones


     

     

    CCMAdmin > Device > Phone > Add New

     

    Phone Type = Cisco Unified Personal Communicator

     

    Cupcphoneadd.jpg


    From: CUPC 1.2 Install Guide


     

    In the Device Name field, specify the soft-phone device name according to these guidelines:

     

    • It must match the user name.
    • It must start with UPC.
    • It must contain the uppercase letters A through Z and numerals 0 through 9, ignoring all other characters.
    • It can contain 12 additional characters after UPC.

     

    Examples: Username > CUPC Device Name

     

    • jjackson > UPCJJACKSON
    • johnnie_jackson > UPCJOHNNIEJACKS
    • johnniejackson > UPCJOHNNIEJACKS
    • john.jackson > UPCJOHNJACKSON

     

    Setup new CUPC Phone - Details Part 1

    Cupcphoneadddetails1.jpg

     

    Setup new CUPC Phone - Details Part 2

    Cupcphoneadddetails2.jpg

     

    Setup new CUPC Phone - Add Directory Number (line)

    Cupcphoneaddline.jpg

    Setup new CUPC Phone - Add Directory Number - Details

    Cupcphoneaddlinedetail.jpg

    Create/Configure User in CUCM


     

    User Management > End User > Add

     

    Tips:

     

    • Associate Phones to User.

     

    • Once the user is initially saved, the form fields will be available to associate their devices.

     

    • Don't forget to ALSO save the device associations.

     

    • A Primary Extension must be configured for each CUPC User for the CUPC client to show a "Soft Phone Server).

    Cupcuserdetails.jpg

    • Associate Devices like desk phones) with user for CTI support.

     

    Define User Roles (optional)

     

     

    Use this to allow the CUPC client to control the deskphone (CTI Enabled) and provide access to the CCM Users page (CCM End Users).

    CCMUser and CTI are both features the user should have to use the full feature set.

     

    • Assign End Users to Standard CCM End Users (User Mgmt > User Group)

     

    • Assign End Users to Standard CTI Enabled (User Mgmt > User Group)

     

    Associate User with Line

     

     

    CUP 6.0 uses User Associated with Line to determine presence status.

     

    Devices > Phones > Find Phone > Edit DN > Associate User with Line (at bottom)Cupcuseraddlineassoc.jpg

    Assign CUP Capabilities to the End User

     

     

    CCMadmin > System > Licensing > Capabilities Assignment

     

    Find User > Check Enable CUP & Enable CUPS > Save

    Cucm61CapabilitiesAssignment.jpg

    CUP User Configuration

     

     

    Login to CCMadmin on Cisco Unified Presence Server.

     

    Check User Status on CUP (Presence) Server

     

     

    Check User Status at:

    System > Status

    CupsSystemStatus.jpg

    Configure User Settings on CUP (Presence) Server

     

    From CUP Admin


    Application > Cisco Unified Personal Communicator > User Settings > Find User


    Configure Application Profile (specifically configure SIP Proxy Profile for Soft Phone Service).

     

    CupsCupcUserSettings.jpg

     

    Unity Connection Configuration for CUPC


     

     

     

    • get to Unity User page at http://<ip-name-VMServer>/ciscopca (personal communications assistant).

     

    Unity Server Setup

     

     

    • CUPC client seems login is against the CallManager Publisher.

     

    • CUPC Client configures a Unity Account in preferences.

    Cupcunityaccount.jpg
     
    Configure the Web Application User on UnityCupcvmcreds.jpg

     

     

     

     

     

     

     

     

     

     

     

    Configure CUP Unity Profile and Assign to Users

     

     

    Configured on Cisco Unified Presence Server

    Cupunityprofile.jpg
    Cupusersettings.jpg
    Validate Server Status on CUPC Client

     

    Cupcunitystatus.jpg

     

     

     

     

     

     

    Configuring Instant (SIP) Messaging


     

     

    This section is next to get developed. Focus so far has been on getting the Softphone online. In the previous screen shots, the CSS for Presence subscriptions is NOT being configured. Need to capture the howto of presence CSS configuration.

     

    We have learned that presence depends on proper LDAP configuration within messenger service to support contacts. More to come....

    Need to get the User SIP ID and the IM Presence integrated, then add in Hard Phones. blah blah

     

    IP Phone Messenger Service

     

     

    Back on CallManager Admin

    • Subscribe Desk Phones to new "Phone Messenger" Service

     

    Devices > Phones > Find Phone > Related Links > Subscribe Services

     

    • Associate user with Lines

     

    This is a feature for non-CUPC phones that Messaging can be extended to. CUPC SIP phones have a SIP IM client integrated and do not use the IP Phone

    Messenger web service.

    Getting Started

    Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: