Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Search instead for
Did you mean:
Devices such as IP phones and gateways registered to a primary Cisco CallManager server reset and register with the secondary Cisco CallManager server and proceed to failback to the primary after a short period of time
When you look at the packet capture you see that packets arriving at the Cisco CallManager server are not properly marked for Quality of Service (QoS). The issue is caused when QoS is not set correctly and network utilization causes the traffic to be dropped or delayed.
In order to resolve the issue, set QoS trust on the switch port where Cisco CallManager is connected. Setting QoS on the switch port on which Cisco CallManager is connected, alleviates the problem enough for the devices to stop resetting.