Disconnect second line when Hold Call hang up
I have the follow symptom:
A call is received and answered in a extension, a new call ingress in the same extension. The new call is answered, and the first call is put in hold.
The problem is that the hold call (first call) is hang up by first caller, in a period of time determined,approximately 5 seconds, and second call is disconnected automatically.
This only happens with internal calls and first call from the PSTN.
What happens? thks
!ephone-dn 3 dual-linenumber 116pickup-group 9label xxx_116name xxx_116hold-alert 30 originator!
!voice-port 0/1/0supervisory disconnect dualtone mid-callcptone CNtimeouts interdigit 5timeouts call-disconnect 5timeouts wait-release 5caller-id enable!
!dial-peer voice 10 potstranslation-profile incoming ext_add_9translation-profile outgoing telcomservice aadestination-pattern 9.Tport 0/1/0!
!telephony-servicemax-ephones 58max-dn 192ip source-address 10.64.183.2 port 2000timeouts interdigit 5timeouts ringing 45timeouts transfer-recall 20system message AON-COFCO-GZ PHONEtime-zone 42time-format 24max-conferences 12 gain -6moh flash:music-on-hold.auweb admin system name admin password aon123web admin customer name aon123 password aon123dn-webedit time-webedit transfer-system blindsecondary-dialtone 9directory entry 1 910000 name testcreate cnf-files version-stamp 7960 Mar 04 2010 12:35:17!
I tried change all the transfer-system options,try no timeouts transfer-recall,can't fix the problem.
Thank you for your posting and interest in the Cisco Support Community. For best practices on posting documents in this community, you can refer to
For technical questions related to a Cisco Product or Technology, we encourage you to post on the Network Professionals Forum (NetPro). For your specific issue, you can go to IP Telephony forum.