Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 

FAQ: How do you program DMP remote control buttons(Red, Green, Yellow, Blue) to switch between Presentations, Web URLs, & Cast?


QUESTION:

How do you program DMP remote control buttons(Red, Green, Yellow, Blue) to switch between Presentations, Web URLs, & Cast?
Please list out the steps...


ANSWER:

You can use DMP MIBs to reconfigure the DMP Remote Buttons.

VARIABLES
=========
  admin           = DMP Web Account Username
  default         = DMP Web Account Password
  a.b.c.d         = IP Address of DMP
  dmm.company.com = FQDN of the Digital Media Manager(DMM) Appliance

MIBS
====

** Use the Following MIB to see the CURRENT Remote Mappings

https://admin:default@a.b.c.d:7777/get_param?p=*.*&init.pop_enable=false


** Configure Buttons

RED
https://admin:default@a.b.c.d:7777/set_param?irasrv.key_RED=ira%20add%201%20sh%201%20RED%20bg%20wget%20-q%20%22localhost%3a7777%2Fset_param%3Finit.BROWSER_CMD%3Dwww.cisco.com%22

GREEN
https://admin:default@a.b.c.d:7777/set_param?irasrv.key_GREEN=ira%20add%201%20sh%201%20GREEN%20bg%20wget%20-q%20%22localhost%3a7777%2Fset_param%3Finit.BROWSER_CMD%3Dhttp://www.google.com%22

YELLOW
https://admin:default@a.b.c.d:7777/set_param?irasrv.key_YELLOW=ira%20add%201%20sh%201%20YELLOW%20bg%20wget%20-q%20%22localhost%3a7777%2Fset_param%3Finit.BROWSER_CMD%3Dhttp://www.yahoo.com%22

BLUE
https://admin:default@a.b.c.d:7777/set_param?irasrv.key_BLUE=ira%20add%201%20sh%201%20BLUE%20bg%20wget%20-q%20%22localhost%3a7777%2Fset_param%3Finit.BROWSER_CMD%3Dhttp://www.apple.com%22


ASSIGN A BUTTON TO CAST
https://admin:default@a.b.c.d:7777/set_param?irasrv.key_RED=ira%20add%201%20sh%201%20RED%20bg%20wget%20-q%20%22localhost%3a7777%2Fset_param%3Finit.BROWSER_CMD%3Dhttp://dmm.company.com:8080/etv-flash-webapp/app/etv_24_.htm%22


** Use the Following MIB to see the NEW CONFIGURED Remote Mappings

https://admin:default@a.b.c.d:7777/get_param?p=*.*&init.pop_enable=false


** Save NEW CONFIGURED Remote Mappings on DMP

   -> Use the ADVANCED TASK to SAVE the DMP Settings.
   -> or Directly on the DMP using the DMP-DM Web Admin
   -> or HTTP MIB
         ie.
         https://admin:default@a.b.c.d:7777/set_param?mib.save=1
         https://admin:default@a.b.c.d:7777/set_param?mib.save=1&mng.reboot=1
 



This document was generated from the following thread:

Version history
Revision #:
1 of 1
Last update:
‎11-23-2010 03:10 PM
Updated by:
 
Labels (1)