Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 

How to adjust the attenuation and gain on individual devices in CallManager 3.2

Resolution

To resolve this issue, choose from one of these options:

  • To set the gain or loss on the audio signal outbound from the IP network, refer to the Audio Signal Adjustment from IP Network setting.
  • To set the gain or loss on the audio signal inbound to the IP network, refer to the Audio Signal Adjustment into IP Network setting.

Use a negative value to apply attenuation and a positive value to apply gain.

For more information, refer to the Port Configuration Settings section of Gateway Configuration.

Version history
Revision #:
1 of 1
Last update:
‎06-22-2009 05:27 PM
Updated by:
 
Labels (1)