Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 

How to confirm that VAD is enabled and how to disable it on Cisco IOS gateways

Resolution

To confirm whether  Voice Activity Detection (VAD) is enabled on a call-by-call basis, perform these steps:

  1. Make a call.
  2. Issue the show call active (brief) command.
  3. Check the values for the Voice over IP (VoIP) call leg.

To disable VAD, perform these steps:

 

  1. Confirm that the correct dial peer is being matched.
  2. Issue the no vad command under the VoIP dial peer.

4476
Views
0
Helpful
0
Comments