Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 

How to enable or disable provisioning on the DGW in Service Engine 2.0

Resolution

To enable provisioning on the Data Gateway (DGW), log in to the Command Line Interface (CLI) and perform these steps:

  1. Issue the Telnet <ip address> <port> command to log in to the DGW CLI.
  2. Issue the nehost/dsdgw>context ds-config command to switch the context to data access.
  3. Issue the /dsdgw[ds-config]>close-provisioning FALSE command to enable provisioning on the DGW.

To shutdown provisioning on the DGW, log in to the CLI and perform these steps:

  1. Issue the Telnet <ip address> <port> command to log in to the DGW CLI.
  2. Issue the nehost/dsdgw>context ds-config command to switch the context to data access.
  3. Issue the nehost[ds-config]>close-provisioning TRUE command to turn off provisioning.
Version history
Revision #:
1 of 1
Last update:
‎06-18-2009 03:52 PM
Updated by:
 
Everyone's tags (3)