Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 

How to send debugs/logs to a Syslog server

#term no mon
#conf t

service timestamps debug datetime msec
service timestamps log datetime msec
service sequence-numbers
no logging console
no logging monitor

logging trap debugging                 (Setting the desired trap level)
logging buffered errors                 (Only if you want errors to be saved in buffer)
logging source-interface loopback <some loopback interface if possible>           (Or use the primary interface)
logging <IP Address of syslog server>

end

10227
Views
5
Helpful
0
Comments