Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 

In a TCCS environment, users are unable to eliminate echo and unable to change input or output levels using voice port gain and attenuation parameters

Core Issue

This is due to a configuration issue with the bearer channel dial-peers. The issue occurs if the codec clear-channel command is issued on the bearer channel dial-peer as well as the signalling dial-peer. Issuing the codec clear-channel command for the bearer timeslots is not supported. The codec clear-channel command does not allow implementation of Voice Activity Detection (VAD), echo canceling, and gain or attenuation. It just passes data from the B-channel as it is. This is the reason for echo.

Resolution

To resolve the issue, remove the codec clear-channel command from the bearer channel dial-peer.

For more information, refer to these documents:

Version history
Revision #:
1 of 1
Last update:
‎06-22-2009 06:13 PM
Updated by:
 
Everyone's tags (4)