Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 

In Cisco CallManager, how to monitor the B-channel status of the 6608 port configured as an MGCP PRI gateway

Resolution

These are the two ways of monitoring B-channel status of the 6608 port configured as a Media Gateway Control Protocol (MGCP) PRI gateway:

  • Through Cisco CallManager traces.
  • Through the Perfmon counter. Perform these steps:

    1. Select the MGCP PRI object and choose Select All Counters. Add counters.

    2. Go to View Report. You should see the B-channel and D-channel status for individual channel.

The limitation with the service parameter is that you can choose only five gateways at a time.

For related information on busying-out the B-channels on a Catalyst 6608 module, refer to these documents:

1607
Views
0
Helpful
0
Comments