Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 

IPV6 UC Features & Deployment examples

 

 

Introduction

 

This document is intended to guide users to learn more about IPv6 deployment in Voice Over IP Network. This document covers the IPv6 functionality & features on Cisco UC Networks and deployment examples.

IPv6 Innovations in CUCM

 

With the system release of CUCM 7.1 Cisco systems has introduced IPv6 functionality to a range of UC products. Today Cisco Introduces, Voice Over IPv6 ( VoIPv6) feature includes IPv4 and IPv6 dual stack support on voice gateways and MTP, IPv6 support for SIP trunks, and Skinny Client Control Protocol (SCCP)-controlled analog gateways.The primary focus of this document is on new IPv6 functionality for Cisco UC networks.

 

Cisco Recommendations

 

  • Cisco recommend that IPv6 UC deployments be configured with a dual stack mode.
  • To maximize IPv6 traffic in the UC network, capable Phones, SIP Gateways and SIP should be configured to support IPv6 signaling and IPv6 media

 

IPv6 support in Cisco Unified Communication Devices

 

IPv6 Support in Cisco Unified Communications Devices

 

  • Cisco Unified Communications Manager 7.1 and later Releases
    All Cisco Media Convergence Servers (MCS server) platforms

 

  • Cisco IP Phones
    3rd Generation Cisco IP Phones running SCCP only :
    Cisco 7906G, Cisco 7911G, Cisco 7931G, Cisco 7941G, Cisco 7941GE7971G-GE, Cisco 7975G
    Cisco 7942G, Cisco 7945G, Cisco 7961G, Cisco 7961GE, Cisco 7962G,
    Cisco 7965G, Cisco 7970G, Cisco 7971G-GE, Cisco 7975G

 

  • Gateways
    SIP Gateways ( ISR 28XX & 38XX, AS5400 )
    VG224 SCCP Analogue Gateway,
    SCCP FXS Ports on Cisco ISR2800 and 3800 Series Routers
    IOS MTPs for IPv4 - IPv6 RTP Media conversion

 

  • Cisco Unified CM SIP Trunks

 

  • Applications
    CUCM CTI - IPv6 Aware
    CUCM AXL/SOAP interface - IPv6 aware
    CUCM Unified CM SNMP (IPv6 aware)

 

Addressing Modes supported for Cisco Unified Communications Devices

 

IPv4 SupportIPv4 & IPv6 Support

IPV4 Supported devices
- Unified CME
- MGCP Gateways
- H.323 Gatewys
- Unified CM H.323 and Intercluster trunks
- video Conferecing Endpoints
- Cisco Unified Video Advantage
- Soft Phones
- WIFI IP Phones
- All SIP Phones
- Older SCCP Phones
IPV4 & IPV6 Supported devices
- CUCM 7.1 and later
- SCCP ISR Analogue Ports
- SIP ISR Gateways
- VG224 Analogue Gateways
- Newer SCCP Phones
- Unified CM SIP Trunks

 

 

 

 

IPv6 - UC Features

1. IPv6 on Cisco Unified Communications Manager

 

IPv6 - CUCM Phone Signaling and Media Options

 

CUCM Device configuration to enable IP addressing Mode - IPv4 & IPv6

 

Goto Device > Device Settings > Common Device Profile

IPv6-3.bmp

  • IPv4/ IPv6 Media Addressing options and SLAAC configurable on a per device/ device profile basis

 

IPv6-4.bmp

 

 

IPv6 - CUCM Addressing

 

CUCM can support :

• One Link Local Address
• One Unique Local Address or
• One Global Address
• ( and an IPv4 address )

 

May20-1.jpg

 

IPv6 - CUCM System Configuration

 

  • Phone - Enterprise Paramater configuration

 

Goto System > Enterprise Parameters

 

May20-2.jpg

 

 

  • CUCM - Phone Addressing Mode Configuration

 

 

Goto Device > Device Settings > Common Device Profile

May20-3.jpg

 

2. IPv6 on CUCM SIP Gateways & Trunks

IPv6 - CUCM SIP Gateways & Trunks Signaling and Media Options

 

CUCM SIP Gateway Device configuration to enable IP addressing Mode - IPv4 & IPv6

IPv6-5.bmp

 

  • IPv4/ IPv6 Media Addressing options configurable on a per device/ device profile basis

 

IPv6-6.bmp

 

IPv6 - SIP Gateways & Trunks - ANAT

 

IPv6 SIP Gateways & Trunks - ANAT (Alternative Network Address Type) with SIP Profile and Device configuration

 

IPv6-7.bmp

 

IPv6 - CUCM SIP Trunk Configuration

 

IPv6 SIP Trunk Configuration on CUCM

IPv6-8.bmp

 

3. IPv6 support on VG224 & ISR SCCP Analogue ports

 

IPv6-9.bmp

 

4. IPv6 - UC & Security

RFC “mandates” privacy and encryption using IPSec

•For UC environments SRTP is used as SRTP is specifically crafted for UDP based RTP traffic and has a lower packet overhead.

•CUCM uses TLS and SRTP - No key exchange required as keys are distributed by CUCM

•IPv4 <-->IPv6 MTPs transparently pass SRTP streams

•Phones use built in MIC

IPv6-11.bmp

 

 

5. IPv6 - CUCM Dual Stack Deployment

 

Figure shows the IPv4 & IPv6 supporting devices on CUCM Dual stack deployment

IPv6-1.bmp

 

Figure shows the IPv4 & IPv6 supporting Applications on CUCM Dual stack deployment

 

IPv6-2.bmp

 

•For Dual Stack deployments MTPs are not required as CUCM will select the common addressing type for media i.e. IPv4

•Except for dual stack devices that are forced (via Common Device Configuration setting) to use IPv6 for Media – in which case an MTP is required

 

Reference

 

 

 

 

 

Version history
Revision #:
2 of 2
Last update:
‎08-29-2017 12:00 PM
 
Comments
Cisco Employee

Thank you for providing detail IPv6 deployment information.

The following new components will also support dual stack for CUCM 8.6.x or higher:

     • IP phones SCCP: 6901/6911 /6921/6941/6945/6961

     • Cisco Unity Connection using SCCP or SIP trunk IPv6 Interface

    http://www.cisco.com/en/US/docs/voice_ip_comm/connection/8x/upgrade/guide/8xcucrug051.html

    Hi Jay Shah

    Thanks for sharing the latest updates.

    Regards

    Lavanya