Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 

Polycom Unified Communications with CUCM

Polycom supports the following deployment models when integrating Polycom Unified Communications with the Cisco Unified Communications Manager (CUCM).

  • Direct Registration of Polycom Endpoints with the Cisco Unified Communications Manager
  • Neighbored Gatekeepers
  • Standalone Polycom CMA System as a Gatekeeper
  • Standalone Cisco IOS Gatekeeper
  • Polycom DMA System as SIP Proxy (New)

Installation requirements, release dependencies and instructions for configuring products with Cisco are detailed for the following Polycom products:

  • Polycom HDX system (all models)
  • Polycom OTX 300
  • Polycom RPX 400, 200
  • Polycom VVX 1500, 1500 C and 1500 D
  • Spectralink wireless phones 8020/8030
  • KIRK Wireless Server 300/600v3/6000
  • Polycom RMX 1500/2000/4000
  • Polycom CMA
  • Polycom DMA
  • Polycom RSS
  • Polycom VBP-E
  • Polycom VSX systems

Releases information and requirements for enabling Telepresence Interoperability Protocol (TIP) in multi-vendor deployments with Cisco, Microsoft Lync, and Polycom are detailed here.

More about Polycom solutions / support for Cisco environments at http://www.polycom.com/cisco

Version history
Revision #:
1 of 1
Last update:
‎06-09-2011 09:52 AM
Updated by:
 
Comments
New Member

Redently updated and added:

  • Polycom DMA System as SIP Proxy

This feature added to DMA release 3.0 enables Universal Bridging (including Cisco) in the Polycom UC Intelligent Core