The video shows how you can upgrade Precision HD 4x Camera with Manual Upgrade procedure.
We upgrade the camera manually since it is hitting a known issue and a firmware upgrade is a fix for that particular issue. For more details, please refer to the following document:
Hope this helps.
Dear Mubashshir Akhtar,
I have Precision HD 4x Camera and want to upgrade it manually, i have followed the complete guide using above link.
the problem is i could not find the Sangam.pkg and Serial_shell files, when i click the below link, it takes me to the Cisco site, and gives a message "page not found"
Your assistance is highly appreciated.
Do you know what software you are currently running on your 4x camera? Do you have it connected to a C20 codec for example and is it working? There are easier ways of upgrading the camera, unless you actually have some issues with the camera.
I have Precision HD 4x Camera and it is not working. .I want to upgrade it manually, i have followed the complete guide using above link.
the problem is i could not find the Sangam.pkg and Serial_shell files, when i click the below link, it takes me to the Cisco site, and gives a message "You are not authorized or this document moved or deleted"
How i can down this file?
i have 5 cameraes that does not react and would very mutch like a link to the software
i Have tried everything systemtools camerarescue without any luck
i have tried it on 5 diferent c20 codecs.
The link https://supportforums.cisco.com/servlet/JiveServlet/downloadBody/25127-102-4-62751/SerialRecoverySoftware.zip is faulty - Page not found
Please could you share the file.
I am trying to recover c20 camera.
"systemtools camerarescue" doesn't recover the camera.
I have attached a PDF with recovery procedure and the files required to follow this recovery procedure.
Thanks for the files.
The files you have included are for the USB port and serial port on the camera so the PDF is not the right doc.
use the doc i have attached ( will only Work in XP )
I have tried this and it Works on a Camera that runs normal.
But i have 5 camears straigth out of the box that shows this error se Picture.
So i am not able to get the #Sangam promt by pressing enter
Is there a way around this ??
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.