Cisco Support Community
Showing results for 
Search instead for 
Did you mean: 

The VG248 gateway fails to register with the Cisco CallManager. The WARNING: SSCP Registration failed. Error: DB config error message is displayed in the event log

Core Issue

This error message may be related to auto registration issues.These errors show up when there are ports enabled but not fully configured.


To resolve this problem, perform these steps:

  • Delete the VG248 entries if you have manually added it on the Cisco CallManager.
  • Enable auto registration. 
  • Add the VG248 with auto registration enabled. 
  • Disable auto registration.
  • Disable all the unused and unconfigured ports.

For more information, refer to Troubleshooting the VG248.

Version history
Revision #:
1 of 1
Last update:
‎06-22-2009 05:37 PM
Updated by:
Labels (1)