Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 

Unable to initialize the CUE GUI interface for CME. The "wrong username/password" error message is received after the username and password credentials are entered for CME

Core Issue

The Cisco Unity Express Installation Wizard is unable to authenticate with the proper credentials to the Cisco CallManager Express on the same router. This happens because the https command is enabled on the router.

Resolution

The ip http server command must be enabled on Cisco CallManager Express. However, if only https (ip http secure-server) is enabled, this command does not work. Both commands must be enabled.

Refer to the Cisco Unity Express 2.3 GUI Administrator Guide for further details.

Version history
Revision #:
1 of 1
Last update:
‎06-22-2009 05:04 PM
Updated by: