Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 

Unable to leave a voice mail or record greetings after replacing the motherboard on the Cisco Unity server

Core Issue

This problem may arise if the Unity server has two network interface cards (NICs) and both of them are enabled.

Resolution

Complete these steps to resolve the issue:

  1. Verify the IP address of Cisco Unity on the Cisco CallManager voice mail ports.

  2. Disable one of the network interface cards (NICs) on Cisco Unity.

  3. Check the IP address on the Cisco CallManager voice mail ports again.

  4. If the IP address does not change, re-assign the IP address to the right NIC card on Cisco Unity.

For more information and some troubleshooting issues related to voice mail, refer to these documents:

511
Views
0
Helpful
0
Comments