Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 

Unity fails during startup with the At least one service or driver failed during system startup error message

Core Issue

This message is displayed when one or more of the Cisco Unity services or the services required by Cisco Unity do not start.

Resolution

To resolve this issue, perform these steps:

  1. Check the startup settings for the services as described in the Startup Error Messages section of Error Messages.        
  2. For information about the error messages that Cisco Unity writes to the Windows Application Event log refer to Cisco Unity Error Message Finder.
Version history
Revision #:
1 of 1
Last update:
‎06-22-2009 05:38 PM
Updated by: