Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 

VG224 Caller ID Problem

Hello,

An Analog Phone with Display is connected to a VG224.
When someone (external or internal) is calling the Analog Phone no Caller ID is visible on the Analog Phone.

The VG224 has IOS 12.4.24T, CUCM Version 7.0.2
VG224 ist configured as SCCP. Caller ID Enable on VG224 is set.

When i call from the Analog Phone to IP Phone everything is fine.

Thanks for Help

Comments
Cisco Employee

Thank you for your posting and interest in the Cisco Support Community.  For best practices on posting documents in this community you can refer to

https://supportforums.cisco.com/docs/DOC-6022#Can_I_use_documents_to_post_technical_questions

For technical questions related to a Cisco Product or Technology, we encourage you to post on the Cisco Support Community NetPro Discussions. For your specific issue, you can go to IP Telephony discussions forum.

2326
Views
0
Helpful
1
Comments