Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 

VG248 ports do not auto register to CallManager

Core Issue

VG248 ports do not auto register to Cisco CallManager. If you try to register port 0 to represent port 1 on the VG248, the ports do not register successfully.

Resolution

Port 0 is used to integrate smdi-based voice mail systems.

To get ports to register, perform these steps:

  1. Delete port 0 from Cisco CallManager.

  2. Configure port 1 in Cisco CallManager.

  3. Disable or enable the correct ports on the VG248.

For more information, refer to these documents:

Version history
Revision #:
1 of 1
Last update:
‎06-22-2009 06:10 PM
Updated by:
 
Labels (1)