Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 

When installing or upgrading to Cisco CallManager 4.x on the Cisco CallManager subscriber, the error message Replication is in failure state. If a new subscriber was just added to the cluster, wait 30 minutes to an hour after its installation completes to

Core Issue

This problem is only seen with the subscriber. This error message might be due to the host and lmhost entries.

Resolution

Complete these steps to solve this problem:

  1. Reload the subscriber and reinstall Cisco CallManager 4.x.

    Proceed to step 2  if you continue to receive this error message.

  2. Make sure that the host and lmhost files on the publisher and subscriber are updated.

    Go to the C:/WINNT/system32/drivers/etc/host and  lmhost directories to locate  the host and lmhost files.

    <ip add> publisher

    <ip add> subscriber

  3. Run DBLHelper.exe on the publisher path to put it in the  c:/program files/cisco/bin directory (in the publisher only).
  4. Double click the DBLHelper.exe file.
  5. Click  Republish.
  6. The Service Release (SR) is reinstalled. Proceed to the next step if it still fails.
  7. Restart the Cisco Database Layer Monitor and MSSQL services.
  8. Reinstall the SR.

For additional information, refer to:

Version history
Revision #:
1 of 1
Last update:
‎06-22-2009 04:14 PM
Updated by:
 
Labels (1)