cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
3090
Views
0
Helpful
2
Comments

Which physical phones are supported?

- Do they need specific versions of firmware?

What softphones are supported?

- Any particular versions?

Comments
Greeshma Bernad
Cisco Employee
Cisco Employee

Thank you for your posting and interest in the Cisco Support Community.  For best practices on posting documents in this community you can refer to

https://supportforums.cisco.com/docs/DOC-6022#Can_I_use_documents_to_post_technical_questions

For technical questions related to a Cisco Product or Technology, we encourage you to post on the Network Professionals Forum (NetPro). For your specific issue, you can go to IP Telephony forum.

You can also refer to the http://www.cisco.com/en/US/docs/voice_ip_comm/cuipph/7962g_7961g_7961g-ge_7942g_7941g_7941g-ge/7_1/english/administration/guide/62614241usr.html

for information on the IP phones support for Built in Conference bridge.

brian.carlson
Level 1
Level 1

Physical phones we have used are both 7970 and 7975. We could not get the 7937 conference phone to work and we have not tried any of our Gen2 7940 phones. Hope this helps.

Good luck.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: