Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 

With Cisco CallManager 4.x, a The Open Procedure for service "DHCPServer" in DLL "C:\WINNT\system32\perfctrs.dll" failed. error message appears intermittently in the application event log

Core Issue

Cisco CallManager 4.x servers receive the Dynamic Host Configuration Protocol (DHCP) server error message even though the DHCP server service is disabled on the servers, as shown:

Event Type: Error
Event Source: Perflib
Event Category: None
Event ID: 1008
Date: 1/25/2006
Time: 11:42:34 AM
User: N/A
Computer: SA-CCM2
Description:
The Open Procedure for service "DHCPServer" in DLL "C:\WINNT\system32\perfctrs.dll"failed. 
Performance data for this service will not be available.
Status code  returned is data DWORD 0.
Data:
0000: 05 00 00 00

The above is a known issue in Microsoft Windows .

Resolution

To resolve this issue, refer to How To Fully Uninstall a Performance Monitor Extension.

Note: Make a backup of the registry before modifying it. Re-boot the Cisco CallManager server after modifying the registry for the change to take effect.

1319
Views
0
Helpful
0
Comments