Cube design

[f.giordano]

Hi all,

We have a project of connecting 2 Siemens Hi-Path PBX and we would like to use Cube to create a Sip trunk between our two location.

I found a document on cisco website with a design (please see attachment), and I'm wondering if the use of 1 Voice Gateway AND 1 Cube for each site was mandatory.

I mean, can Cube play the role of Voice Gateway AND Cube ? This is to limit cost of hardware.

So we would purchase two 2900series instead of four.

Thanks for your answer.

Regards

Fabian

[cbrasolin]

Hi giordano,

you don't need the two CUBE for connect the PBX, you only need the two Voice Gateway.

the first VG will have a dial-peer pots toward the PBX and a dial-peer voip (H323 or SIP is up to you) toward the second VG, the same configuration is needed on the second VG.

[f.giordano]

Ok thank you.

Fabian