Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Distributed Voice Mailbox Design Aspect

Hi,

I have centralized Call Manager. My requirement is: I need all branches to have their local Voice Mailbox. I do understand that, for this reason i need to go with Unity Express on the Branch Router..

My question is: Whether such setup will work?

Rgds,

Partha

4 REPLIES
Cisco Employee

Re: Distributed Voice Mailbox Design Aspect

Hi Partha,

Are you using CUCM for the call control? If so, from the CUCM SRND 7.x centralized call processing and distributed messaging is a supported model.

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/srnd/7x/vmessage.html#wp1086096

Cheers,

Conor

VIP Super Bronze

Re: Distributed Voice Mailbox Design Aspect

You may want to look at Cisco Unified Messaging Gateway with VRST (Voicemail SRST). The summary is that CUMG auto-configures local CUE modules with subscribers at the local site. The subscriber's mailbox normally resides on Unity Connection; however, CUE is used during SRST to provide resilient voicemail. When the connection is restored, CUMG synchronizes the messages in CUE back to Unity Connection.

Please remember to rate helpful responses and identify helpful or

Re: Distributed Voice Mailbox Design Aspect

all you need to do is

now u have unity or unity connection with a voice mail profile

when you add a UE to the brach create a new voice mail profile for the UE and use this voice mail profile for all the users in that branch

in this case they will use thier local UE for VM

good luck

if helpful Rate

New Member

Re: Distributed Voice Mailbox Design Aspect

Thanks a lot for your generous help..

Rgds,

Partha

716
Views
8
Helpful
4
Replies