If all is set, and your redeployment fails in the same way, I would advise you to open a TAC ticket so that we can look into the calibtest logs and see why this might be failing (it can be any kind of resource/network issue and would need more extensive troubleshooting).
I am not sure if you assigned dedicated UCS hosts to CWMS solution as advised. If this is a proof of concept, that is fine. But if you plan to put the system in production, and you have any co-residing VMs, in case of any issues, Cisco TAC won't be able to support you.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...