First of all, I apologize for the mixup. The fact that you are using MeetingPlace and report high memory usage as an issue is what threw me off, because this is just an expected behavior.
Since MeetingPlace is a very resource intensive product, the system loads everything into memory in order to speed up the response time. For MeetingPlace, it is normal to use between 97-99% of memory at all times.
Hence, what you are experiencing is not a problem, but a designed behavior.
Please, let me know of any additional questions you might have, and once again, I apologize for the mixup.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...