I need help please , i have a solution for video conference. I have an existing CUCM cluster v9 , and i have a video endpoints (9971 , E20 ,E60). We need to do video conference (ad-hoc conference ) , after my studying i think i can use Cisco MCU unit to do video conference , i need to get answers for the below:-
1-What is the model for Cisco MCU?.
2-How many conference participants can connect to the conference?.
3-I think there is no need for VCS (call control) for my case , because i donot have 3rd part h323 or telepresence)?.correct.
4-Can i do schedule for meeting by MCU?.
5-Which protocol between MCU and CUCM cluster will be prefered?. Any document for the configuration , please.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...