1) Is a port synomonous with a meeting or a caller?
2) In our environment, we'll be running in High Quality mode and will have meetings with mixes of G729 callers and G711 callers. The AVN nodes are configured as Express Media Servers and are both UCS C-Series. Video utilization is effectively 0.
Since video is 0, lines 42, 43, 44 on the XLS are a ratio value of "0" and I'll assume a 50/50 mix of G729 vs G711. This calulates field N42, N43 and N44 (C-Series) as "171" callers(?) Is this correct? Am I reading this correct?
3) Another method of calculating is that the first URL states 6 SRUs for G729 or 8 SRUs for G711. If the C-Series has an aboslute SRU maximum limit in HQ mode: I can look at my current MeetingPlace 8.0 meetings using Conference Manager and figure out how many G729 vs G711 calls (based on whether their DNs are coming over WAN) and calculate:
(# of G729 callers * 6SRUs) + (# of G711 callers* 8 SRUs) < Total C-Series Node SRU capacity.
I know this is darn wordy, but I appreciate any direction/thoughts on this.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...