Good afternoon , I'm currently installing a demo of cwms in a customer. I 'm installing a small system with 50 users IRP . I make the deployment of the two virtual machines on a C220 M3 server, the memory requirements and recommended space, CPU are meets.
after the deployment of virtual machines, I turn ON the 2 machines , I suggest the link to continue the deployment , I connect and introduce the requested data: private VIP, Public VIP, and URL of meetings and administration . this happens after checking the data and introduce the IRP system machine is the machine and asked me to continue .
when I press the button to continue , turn to the verification system and stays there . 5 minutes throws an error message in the status of the implementation and the page gets stuck , all buttons are disabled , will not let me move forward or backward to correct the error .
I delete the virtual machines and create new ones and still throwing me the error.
any help or advice with this fault ?
Can I restart the process of first deployment, when this happend i don´t know how to recover the process.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...