we have IPCCE with CVP and gatekeeper when we tried to land a call to agent with 3 digit extension (100) the cti goes int reserved and the call doesnot came in , but when we triesd 4 or 5 digit extension it works fine please help?
I double checked different scenarios, there is not a miminum length defined but there is a max length attribute.
This would suggest some misconfig or other issue occuring down to your particular deployment.
I would recommend checking you have a 3 digits label for you network VRU in the ICM config and if that is the case I would raise a TAC SR, providing gateway, GK and CVP logs, GW with RAS and ISDN Q931 debug turned on.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...