While we try to login into diagnostic framework tool using the proper credentials, web page throws 403 forbidden error message. If we look into log file naed diagnosticframework.log, we are getting the following message.
"Domain authorization is NOT available for the ICM instance 'lab'. The server is in the domain. However, the config group in Instance OU for this instance was not found in the domain. If you believe this is in error then run Domain Manager or check for other domain related issues. Domain authorization will not work for this ICM instance until the issue is resolved and this service is restarted."
I suspect this could be due to access issue. But just want to know which groups i need to associate to.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...