Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Adding Cisco Unity User - CM 5.1.2

I'm trying to "Create Cisoc Unity User" within the CM administration. I select the Application Server and the Subscriber Template, both which appear to be correct. Then I get "Unmapped Exception (401)Unauthorized". This is the first time I've attempted to add a user myself. I've figured out everything but this. Can anyone help?

5 REPLIES
New Member

Re: Adding Cisco Unity User - CM 5.1.2

Did you ever figure this out? I am running into the same thing.

New Member

Re: Adding Cisco Unity User - CM 5.1.2

Honestly, this has been so long ago, I'm not sure what I was asking :). I do know how to add users now. What is it you're trying to do?

New Member

Re: Adding Cisco Unity User - CM 5.1.2

I was trying to create a Unity Connection user from the UCM interface and got the same exact error that your original post had.

New Member

Re: Adding Cisco Unity User - CM 5.1.2

I see this post is quite old now and you've probably already resolved the issue however I ran into the same problem myself using Connection 7 and UCM 6.1 and after using a cisco document on the issue:http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a0080a98d27.shtml

which was partially useful managed to work out a fix that worked for me so this post may be useful to future users running into this problem.

1. In UCM go to User Management> Application User create a new user id using the same username and password used for Unity Connection administration and add to user group "Standard CCM Super Users"

2. Go to System> Application Server and either create an application server to Unity Connection or update the existing connection to select the Application user you've just created

3. Go to Unity Connection Administration> Telephony integration> Phone System and choose the UCM integration. Choose Edit> UCM AXL Servers and add the UCM servers running the AXL web service (the port is 8443). The AXL server settings username and password is the application user you've just created. The username and password must match exactly (and remember should be the same as the Unity connection administration username and password)

4. You may need to reset the AXL web service in UCM serviceability

The Create Unity User link should now work (if I haven't missed anything out)

Hope this helps.

New Member

Adding Cisco Unity User - CM 5.1.2

Brilliant I have just come accross your fix and it worked for me. I can now set up Unity users from CUCM

Thanks

709
Views
0
Helpful
5
Replies