Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Adding IPCC ICM and CVP servers to CUOM

Hi,

I want to know how can I add ICM and CVP servers to Cisco Unified Operation Managers. I have read the document and as per that we need to enable and configure SNMP service on servers. But I am unable to start SNMP service on one of ICM server i.e. AW. The below mentioned message is appearing on start of SNMP service. Please advise the best way to add all IPCC servers to CUOM and to get the best possible results from CUOM.

Regards,

Hammad.

snmp error.JPG

1 ACCEPTED SOLUTION

Accepted Solutions
Bronze

Re: Adding IPCC ICM and CVP servers to CUOM

"The Microsoft Windows SNMP service for processing SNMP requests is disabled as part of Unified CCE setup and replaced by the Unified CCE SNMP Management service. The Unified CCE SNMP Management service is provided for more sophisticated SNMP capabilities than are offered by the standard Microsoft Windows SNMP service."

If you look at your Services on your UCCE server you should see the service Cisco Contact Center SNMP Management.

Take a look at this white paper on the subject....

http://www.cisco.com/en/US/prod/collateral/netmgtsw/ps6491/ps6705/ps6535/white_paper_c11-543550.html

Also, here's the link to the SNMP guide for UCCEv7

http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/icm_enterprise/icm_enterprise_7_0/configuration/guide/snmp70ug.pdf

Hope this helps

4 REPLIES
Bronze

Re: Adding IPCC ICM and CVP servers to CUOM

"The Microsoft Windows SNMP service for processing SNMP requests is disabled as part of Unified CCE setup and replaced by the Unified CCE SNMP Management service. The Unified CCE SNMP Management service is provided for more sophisticated SNMP capabilities than are offered by the standard Microsoft Windows SNMP service."

If you look at your Services on your UCCE server you should see the service Cisco Contact Center SNMP Management.

Take a look at this white paper on the subject....

http://www.cisco.com/en/US/prod/collateral/netmgtsw/ps6491/ps6705/ps6535/white_paper_c11-543550.html

Also, here's the link to the SNMP guide for UCCEv7

http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/icm_enterprise/icm_enterprise_7_0/configuration/guide/snmp70ug.pdf

Hope this helps

New Member

Re: Adding IPCC ICM and CVP servers to CUOM

Many thanks Dude!!

New Member

Re: Adding IPCC ICM and CVP servers to CUOM

But actually in my CVP server I am not able to find the cisco snmp agent Only in CVP's.

Kindly advice how I can add the snmp agent in cvp server

Sent from Cisco Technical Support iPhone App

New Member

Re: Adding IPCC ICM and CVP servers to CUOM

Hi Zaki,

You need to install Windows SNMP service when installing operating system on server. Cisco SNMP Management service comes as a part of CVP installation but it actually use Windows SNMP comonents. After CVP installation Windows SNMP service will be disabled and Cisco SNMP Management will be enabled and running. You can push SNMP setting from CVP OAMP. I hope this will help.

Regards,

Hammad.

852
Views
0
Helpful
4
Replies