Agent on an ACD call while the second ACD call come to agent phone
IPCCX 4.0(5). Users reported that they are on an ACD call, but then see a second call come to their Phone. When Agent completed the first call, CAD state changed to Not Ready.
Here is agent state details:
20/02/2008 11:25:23 AM Ready 0 0:00:25
20/02/2008 11:25:48 AM Reserved 0 0:00:08
20/02/2008 11:25:56 AM Ready 0 0:00:00
20/02/2008 11:25:56 AM Talking 0 0:00:17
20/02/2008 11:26:13 AM Reserved 0 0:00:15
20/02/2008 11:26:28 AM Not Ready 32763 0:04:56
When a call comes at 11:25:48, CAD state changed to Reserved. At 11:25:56, agent started Talking, but CAD status changed to Ready and Talking at the same time. Agent got a second ACD call while still in talking with first caller. The second call was Ring No Answer after 15 seconds. The second call went back to CSQ. The agent CAD state changed to Not Ready insteady of Working --> Ready.
Re: Agent on an ACD call while the second ACD call come to agent
I have one group of agents reporting the same thing occasionally.
In addition they just reported that they have had the same call get routed to two agents within a few seconds of each other.
The call gets routed to an agent, the agent answers and starts talking, then the call gets routed to a second agent, and when the second agent picks up, they are conferenced with the caller and the first agent.Unfortunately, the users are not giving me much to go on. No dates, or times, they just said that it has happened several times.
I am running 5.0(2). Hopefully we will be upgrading to 7 in June.
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...