We did call flow test, one call flow translation route from customer IVR to CVP fails all the time, as calls are dropped on ingress voice gateway in one second. Telco provider blamed voice gateway not sending 'alert' or 'call progress' back by certain timer, so drop the call. After checking log/debug, CVP never sends out any 'alert' or 'progress' signal back to gateway. And we tried to find if we could force alert signal back from gateway, no luck so far. IOS does have a few commands for H323, we use SIP.
Is it possible to let CVP issue call progress signal? Or force this from IOS?
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: firstname.lastname@example.org Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...