I'm looking for a list of approved server hardware for CRS 4.0(3). I'm currently running CRS 3.5(2) on an HP DL380 G2. I'm going to upgrade our 3.5(2) install on new hardware to version 4.0(3). Are all the new DL380s G4 & DL320s supported. Also does it matter whether I use SATA or SCSI drives for the CRS install?
The only thing that I can find that makes reference to non-MCS servers is the Configuration and Ordering Tool. Please see the link below. If you go to the Step 2 tab, there is a Select Server drop down. If you don't have CCO access, let me know and I'll copy the list for you.
I noticed the the newer processors are not listed for the DL380 i.e.XEON 3.6GHz & 3.8GHz. Since their not listed does that mean that TAC won't support this configuration if I choose to use the faster processors?
You have reached the Cisco Logistics Support Center.. To Check Status of
your RMA, visit Product Returns & Replacements (RMA). Need help? Contact
us by Phone or Email. North Americas Phone: 1800 553 2447 Option 4
Email: email@example.com Europe Phone: +3...
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...