Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

Bronze

Auto Answer with 10 seconds delay

Is there a way to set the agent phone not ringing and auto answer right away after finishing up the previous call. Customer would like to have 10 seconds gap before the next call connects.

Thanks.

Dat Pham

5 REPLIES

Re: Auto Answer with 10 seconds delay

Sure, set wrap up to 10 seconds and you would be good to go.

david

Bronze

Re: Auto Answer with 10 seconds delay

Thanks David,

I have set wrap up time to 20 seconds, but some how agents are complaining. I will to test it my self to find out then.

Dat

New Member

Re: Auto Answer with 10 seconds delay

We configured the same thing.

A wrap-up time of 10 seconds then agents are able to take the new call.

We also configured auto-answer on the agent's extension so that agent is directly connected to the customer once the wrap up time finishes.

The problem is that even we have auto answer configured, we notice that some agents are not connected directly, and there are 7 or 8 seconds between the agent is selected and the call is connected.

Does anyone faced such issue?

Re: Auto Answer with 10 seconds delay

Are you saying the call takes 7 seconds after the 10 seconds wrap up time? If you look at the client logs, are you seeing 7 seconds between the reserved state and talking state?

david

New Member

Re: Auto Answer with 10 seconds delay

Yes, exactly.

Event if we have configured the auto-answer option, when the agent is reserved, it takes between 7 and 8 seconds for the call to be connected (during this time the agent is reserved and can not answer or drop the call).

The issue does not appear for all agents but for some of them.

180
Views
5
Helpful
5
Replies