Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

Auto reply in CIM 4.2.4

We have installed Cisco Email interaction manager 4.2.4 at one of our client site.

here we are unable to find the option for configuring auto reply (mail acknoldegment) in this.version of CIM.

If any one know about the auto reply configuration in CIM 4.2.4

  • Contact Center
1 ACCEPTED SOLUTION

Accepted Solutions
Green

Auto reply in CIM 4.2.4

You have not made a rule. It's not that obvious - but type the rule name in the Rule Name box and press the Enter key. Now you can select and configure the rule, and again press enter to create a row.

Lots of the EIM config works this way. You must press Enter.

Regards,

Geoff

3 REPLIES
Green

Auto reply in CIM 4.2.4

Look at  page 54 of the 4.3 Guide Cisco Unified Web and E-Mail Interaction Manager Administrator’s Guide to Routing and Workflows.

Regards,

Geoff

Auto reply in CIM 4.2.4

Hi Geo thank you for the information.

here when i configure rule for auto- acknowldgement, the rule condition is not active.

so i am not able to create any rules for auto ack.

Green

Auto reply in CIM 4.2.4

You have not made a rule. It's not that obvious - but type the rule name in the Rule Name box and press the Enter key. Now you can select and configure the rule, and again press enter to create a row.

Lots of the EIM config works this way. You must press Enter.

Regards,

Geoff

414
Views
0
Helpful
3
Replies
This widget could not be displayed.