In CAD, is there any way to hide the supervisor from the chat window?
When the supervisor logs in to monitor agent calls, they can see that she is online. She is concerned that their performance changes only when she is there. She would like the ability to log in and monitor without agents knowing. So... is there any way to hide the supervisor from the chat window???
If you have a premium license, you may want to try out remote monitoring instead. Since that does not require a CAD or CSD login, the supervisor will not appear in the chat window. The other easy solution would be to just log in all the time or most days so agents can't tell the difference.
It plays the rmon.aef script file. It's a simple IVR that lets the supervisor pick a CSQ ID to monitor. That is not easily obtained to the casual supervisor. Basically, you can log into AppAdmin, and goto RmCm > CSQ, and then click the CSQ you want to monitor, and then check the URL in your browser. The CSQ id should be a URL parameter. It's usually a lwo number like 3, 4, 8, 12, etc. If you wanted to, you can open the rmon.aef script in your editor (File > New > Queuing > Remote_Monitoring) and take a look under the hood. Or, if you were really adventurous, you could build your own remote monitor script.
UCCX becomes the requester, then plays the audio to you in the built-in step (Start Monitor), and it works just as if a Supervisor was requesting the monitor.
Please use the star ratings to help drive great content to the top of searches.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...