We are running the Cisco UCCX 5.0 with Cisco CME 4.X, i have upgraded the IOS due to a memory leak bug and just after the upgrade the Cisco Agent Desktop is failing to login and showing the attached error.
Old IOS: c2800nm-spservicesk9-mz.124-11.XW2.bin
An agent is unable to log into the Cisco Agent Desktop and receives this error message:
Login attempt failed due to Peripheral Offline
This error can occur when the Resource Manager-Contact Manager (RMCM) subsystem does not start due to an invalid login/password for the RM JTAPI user. In other words, this could be due to a password mismatch between the RM JTAPI user and the JTAPI user.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...