Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

CCX 5.0(2) SR2 to SR3 upgrade issue

Good day.I'm going to upgrade our ccx 5.0(2) from SR2 to SR3.

As i found out in manual,before upgrade,i should copy wfavvid folder to another location.

But there's no any step what i need to do with this directory then.

My question: after upgrade,is there need to replace updated folder with backed up one?

Or this folder need to be copied only if upgrade was unsuccessfull?

Thanks.

1 ACCEPTED SOLUTION

Accepted Solutions

Re: CCX 5.0(2) SR2 to SR3 upgrade issue

Hi,

I think the copy of wfavvid is simply a safeguard in case you have problems with the upgrade.  You do not want to copy that directory back after the upgrade otherwise.  Just copy it to another location for safeguard and run the upgrade.  Restart when prompted and you should be good to go.  If all is well after testing you can get rid of the copied wfavvid directory.

Thanks,

Mike

2 REPLIES

Re: CCX 5.0(2) SR2 to SR3 upgrade issue

Hi,

I think the copy of wfavvid is simply a safeguard in case you have problems with the upgrade.  You do not want to copy that directory back after the upgrade otherwise.  Just copy it to another location for safeguard and run the upgrade.  Restart when prompted and you should be good to go.  If all is well after testing you can get rid of the copied wfavvid directory.

Thanks,

Mike

New Member

Re: CCX 5.0(2) SR2 to SR3 upgrade issue

Thanks a lot for your help.

I'll try now.

202
Views
0
Helpful
2
Replies
CreatePlease to create content