I have a CCX application (8.5) acting as an auto attendant. Everything works properly except when users calling from the outside (PSTN) try to use the AA to transfer to the Exchange 2007 pilot number. I know CCX sets the arrival type of the call to 'redirect' (as opposed to 'direct'), and this is causing Exchange to think it is a forwarded call and looks for a mailbox. I am debating creating another copy of the SIP trunks that for Exchange that are configured not to pass forwarding information and having the CTI port CSS find that route pattern first, but it seems like there should be an easier way.
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...