If it's a requirement, I would look at getting a proper dial-in meeting solution such as MeetingPlace or MP Express. You'd then be able to initiate a conference by configuring a permanent meeting on a known meeting ID, dialing the MP solution, then pulsing out the digits.
I've no idea what you're planning to use the conference for, but you'd have to think it through carefully - if there's any requirement to have multiple callers thrown into multiple conferences then it come become tricky to manage.
Please remember to rate helpful posts to identify useful responses, and mark 'Answered' if appropriate!
The short answer is that you don't.... That isn't entirely true while at
the same time it kind of is, but for the most part you don't configure
the softkeys. You enable or disable them via TCL. Here is the long
answer. Be sure to read the whole thing or e...
Topology: IP Phone > Switches > Microsoft NPS setup to forward 802.1x
proxy to > ISE 2.1 patch 3 Authentication: EAP-TLS using Cisco MIC SANs
Phone Models 802.1X support? 802.1x flavor Addtl Comment EAP-MD5 EAP-TLS
Cisco 3905 Y Y N Cisco 6911 Y Y N Cisco ...
This document describe how DST changes and how time changes are
implemented in DST. Daylight Saving Time (DST) is the practice of
setting the clocks forward 1 hour from standard time during the summer
months, and back again in the fall, in order to make b...