Configuring IP SLA in cisco 3925 router.

[fb_webuser]

HI Team.we need to configuring IP SLA in cisco 3925 router with c3900-universalk9-mz.SPA.151-4.M4.bin ios. For Monitoring purpose. Earlier we have used the rtr command for the same. Now we are going with new Cisco 3925 router. with the above mentioned IOS. Pls suggest whether we can configure the IP SLA in the router with Licence. Or We need to buy the licence for the ame.

---

Posted by WebUser Ramkumar Selvaraj from Cisco Support Community App

[Aaron Harrison]

Hi

I think the command has been updated - rather than 'rtr responder' it's now 'ip sla responder'.

I don't believe you need any particular feature set.

Also, this is a 'Contact Center' forum - you would get more responses in other places.

Regards

Aaron Harrison

Principal Engineer at Logicalis UK

Please rate helpful posts...

[Robert Rowland III]

you need the "DATA" license.  Otherwise you will install routes point to devices that can go down and you will never know it.

http://www.cisco.com/en/US/prod/collateral/routers/ps10616/white_paper_c11_556985_ps10536_Products_White_Paper.html#wp9000801

[Rommel Papa]

Hi,

The IP SLA Configuration is different now. I've solved this issue through changing the configuration:

Please see link for sample:

http://www.cradlepoint.com/sites/default/files/productdocs/Cisco_WAN_Failover_Configuration_via_IP_SLA.pdf

Regards,

Rommel