Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

Silver

Configuring IP SLA in cisco 3925 router.

HI Team.we need to configuring IP SLA in cisco 3925 router with c3900-universalk9-mz.SPA.151-4.M4.bin ios. For Monitoring purpose. Earlier we have used the rtr command for the same. Now we are going with new Cisco 3925 router. with the above mentioned IOS. Pls suggest whether we can configure the IP SLA in the router with Licence. Or We need to buy the licence for the ame.

---

Posted by WebUser Ramkumar Selvaraj from Cisco Support Community App

3 REPLIES
Super Bronze

Configuring IP SLA in cisco 3925 router.

Hi

I think the command has been updated - rather than 'rtr responder' it's now 'ip sla responder'.

I don't believe you need any particular feature set.

Also, this is a 'Contact Center' forum - you would get more responses in other places.


Regards

Aaron Harrison

Principal Engineer at Logicalis UK

Please rate helpful posts...

Aaron Please remember to rate helpful posts to identify useful responses, and mark 'Answered' if appropriate!

Configuring IP SLA in cisco 3925 router.

you need the "DATA" license.  Otherwise you will install routes point to devices that can go down and you will never know it.

http://www.cisco.com/en/US/prod/collateral/routers/ps10616/white_paper_c11_556985_ps10536_Products_White_Paper.html#wp9000801

New Member

Configuring IP SLA in cisco 3925 router.

Hi,

The IP SLA Configuration is different now. I've solved this issue through changing the configuration:

Please see link for sample:

http://www.cradlepoint.com/sites/default/files/productdocs/Cisco_WAN_Failover_Configuration_via_IP_SLA.pdf

Regards,

Rommel

3669
Views
0
Helpful
3
Replies