Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

CUCM pim is active with some warnings

Hi ,

     In sprawler the CUCM pim is showing as ACTIVE with 21 config warnings. It sowing as Bad Device type (check log)  on status bar.

Here im attaching logs. Please solve this issue.

Thanks&Regards,

MB Reddy.

1 ACCEPTED SOLUTION

Accepted Solutions

CUCM pim is active with some warnings

It's a little hard to tell, but I have a feeling you have some device targets which aren't configured properly, check this part out these are the first errors which come up in your log:

04:15:28 pg1A-pim1 ADDED\UPDATED 1 AgentDeskSettings on Peripheral 5000.

04:15:28 pg1A-pim1 Trace: [  1444]DeskLinkDeviceTarget::DeskLinkDeviceTarget: Unknown device type specified. NetTrgID=5002 Type=

04:15:28 pg1A-pim1 Trace: [  1444]DeskLinkPeripheral::SetAlert - (DeskLinkDeviceTarget::DeskLinkDeviceTarget) Setting CONFIG Alert #1 - 4 :15:28 Bad Device Type 

04:15:28 pg1A-pim1 Trace: [  1444]DeskLinkDeviceTarget::Constructor: NetworkTargetID=5002, Type=, Ext=, Dialed#=

04:15:28 pg1A-pim1 Trace: [  1444]DeskLinkDeviceTarget::DeskLinkDeviceTarget: Error Device Target Glob Addr=1004/Net TgID=5003 with duplicate ext=  not configured

04:15:28 pg1A-pim1 Trace: [  1444]DeskLinkPeripheral::SetAlert - () Setting CONFIG Alert #2 - 4 :15:28 Duplicate Extension 

04:15:28 pg1A-pim1 Trace: [  1444]DeskLinkDeviceTarget::DeskLinkDeviceTarget: Unknown device type specified. NetTrgID=5003 Type=

04:15:28 pg1A-pim1 Trace: [  1444]DeskLinkPeripheral::SetAlert - (DeskLinkDeviceTarget::DeskLinkDeviceTarget) Setting CONFIG Alert #3 - 4 :15:28 Bad Device Type 

04:15:28 pg1A-pim1 Trace: [  1444]DeskLinkDeviceTarget::Constructor: NetworkTargetID=5003, Type=, Ext=, Dialed#=

See if you can find NetworkTargetID 5002 and 5003 and figure out what they refere to.

david

3 REPLIES

Re: CUCM pim is active with some warnings

Unable to open attach file, but you can check device target in ICM config manager or associated phones with PGUSER.

Sent from Cisco Technical Support iPhone App

CUCM pim is active with some warnings

It's a little hard to tell, but I have a feeling you have some device targets which aren't configured properly, check this part out these are the first errors which come up in your log:

04:15:28 pg1A-pim1 ADDED\UPDATED 1 AgentDeskSettings on Peripheral 5000.

04:15:28 pg1A-pim1 Trace: [  1444]DeskLinkDeviceTarget::DeskLinkDeviceTarget: Unknown device type specified. NetTrgID=5002 Type=

04:15:28 pg1A-pim1 Trace: [  1444]DeskLinkPeripheral::SetAlert - (DeskLinkDeviceTarget::DeskLinkDeviceTarget) Setting CONFIG Alert #1 - 4 :15:28 Bad Device Type 

04:15:28 pg1A-pim1 Trace: [  1444]DeskLinkDeviceTarget::Constructor: NetworkTargetID=5002, Type=, Ext=, Dialed#=

04:15:28 pg1A-pim1 Trace: [  1444]DeskLinkDeviceTarget::DeskLinkDeviceTarget: Error Device Target Glob Addr=1004/Net TgID=5003 with duplicate ext=  not configured

04:15:28 pg1A-pim1 Trace: [  1444]DeskLinkPeripheral::SetAlert - () Setting CONFIG Alert #2 - 4 :15:28 Duplicate Extension 

04:15:28 pg1A-pim1 Trace: [  1444]DeskLinkDeviceTarget::DeskLinkDeviceTarget: Unknown device type specified. NetTrgID=5003 Type=

04:15:28 pg1A-pim1 Trace: [  1444]DeskLinkPeripheral::SetAlert - (DeskLinkDeviceTarget::DeskLinkDeviceTarget) Setting CONFIG Alert #3 - 4 :15:28 Bad Device Type 

04:15:28 pg1A-pim1 Trace: [  1444]DeskLinkDeviceTarget::Constructor: NetworkTargetID=5003, Type=, Ext=, Dialed#=

See if you can find NetworkTargetID 5002 and 5003 and figure out what they refere to.

david

New Member

CUCM pim is active with some warnings

Thanks David,

        Ive checked the targets, those are not configured properly.

Now its working fine with out errors.

Regards,

MB Reddy.

815
Views
0
Helpful
3
Replies