Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Community Member

CUIC Server load balancing via ACE

Hi All,

I want to load balance 4 cuic server via ACE using vip address.

Real server address: 10.0.0.21,10.0.0.22,

VIP address is : 10.0.0.50

probe http PROBE_HTTP

  interval 3

  faildetect 1

  passdetect interval 5

  passdetect count 1

  receive 2

  request method get url /index.html

  expect status 200 302

rserver host cuic_test_1

  ip address 10.0.0.21

  inservice

rserver host cuic_test_2

  ip address 10.0.0.22

  inservice


serverfarm host cuic_farm_test

  description CUIC Farm at DAKC and BCP DC

  probe PROBE_HTTP

  rserver cuic_test_1 8444

    inservice

  rserver cuic_test_2 8444

    inservice

sticky http-cookie ACE_COOKIE CUICserver_STICKY

  cookie insert

  replicate sticky

  serverfarm cuic_farm_test

class-map match-all L3_CUIC_VIP

  2 match virtual-address 10.0.0.50 tcp eq any

policy-map type loadbalance first-match cuic_L7_SLB

  class class_default

    serverfarm cuic_farm_dakc

policy-map multi-match policy_test

class L3_CUIC_VIP

    loadbalance vip inservice

    loadbalance policy cuic_L7_SLB

    nat dynamic 2 vlan 1000

interface vlan 1000

nat-pool 2 10.0.0.50 10.0.0.50 netmask 255.255.255.0

  service-policy input remote_mgmt_allow_policy

  service-policy input policy_test

Probe is success but i am not able to access the cuic via VIP.

Please do the needful.


Everyone's tags (1)
1 ACCEPTED SOLUTION

Accepted Solutions
Community Member

CUIC Server load balancing via ACE

1)You need to add port number under PROBE_HTTP

port 8444

2)In Policy map you have added wrong server farm

policy-map type loadbalance first-match cuic_L7_SLB

  class class_default

    serverfarm cuic_farm_dakc(this should be cuic_farm_test)

Please remember to rate for helpful responses

3 REPLIES
Community Member

CUIC Server load balancing via ACE

1)You need to add port number under PROBE_HTTP

port 8444

2)In Policy map you have added wrong server farm

policy-map type loadbalance first-match cuic_L7_SLB

  class class_default

    serverfarm cuic_farm_dakc(this should be cuic_farm_test)

Please remember to rate for helpful responses

Community Member

Re: CUIC Server load balancing via ACE

This post seems bit old..but i would like to continue with few queries-

 

1. We are planning to use 11.6 CUIC with F5 load balancers. Can i use F5 for CUIC 11.6?

2.Is the probe url remains the same for 11.6 version?

 

 

Bronze

Re: CUIC Server load balancing via ACE

For #1, you should be good as long as you meet the couple requirements spelled out in the compatibility guide.

https://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/cust_contact/contact_center/icm_enterprise/ucce_compatibility/matrix/ucce_11_6_x_compat.html#Load_Balancers

Also, I believe this is only for real time and historical reports, not LiveData

740
Views
0
Helpful
3
Replies
CreatePlease to create content