Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

CUSP configuration example.

Dear Team,

We have UCCE 8.5 deployed with CVP 8.5 in H323 comprehensive model.

We're planning to change the signalling method to use SIP in stead of H.323 and we will use CUSP (3925 With NM). (two CUSP for redendance).

I was hoping that you can help me with the CUSP configuration, since I could find an example of CUSP configuration.

Thank you.

1 REPLY
New Member

CUSP configuration example.

Below the configuration of the GK, and how I see that should be done on the CUSP . do you have any remarks?:

H.323

---------------------------------------------

gatekeeper

zone local zone-default tt.tn 172.20.10.250

zone local zone-gateways tt.tn

zone local zone-cvp tt.tn

zone local zone-outbound tt.tn

zone prefix zone-default 1...

gw-type-prefix 4#* hopoff zone-outbound

gw-type-prefix 1#* hopoff zone-default default-technology

gw-type-prefix 2#* hopoff zone-cvp

gw-type-prefix 3#* hopoff zone-gateways

no shutdown

SIP PROXY

----------------------------------------------

conf t

sip network netA

end network

conf t

sip dns-srv

trigger condition in-netA

sequence 1

in-network netA

end sequence

end trigger condition

trigger condition out-netA

sequence 1

out-network netA

end sequence

end trigger condition

server-group sip group cvp.tt.tn netA

element ip-address 172.20.10.6 5060

element ip-address 172.20.10.7 5060

element ip-address 172.20.10.8 5060

element ip-address 172.20.10.9 5060

end server-group

server group sip group gateways.tt.tn netA

element ip-address 172.20.10.238 5060

element ip-address 172.20.10.240 5060

element ip-address 172.20.10.241 5060

element ip-address 172.20.10.242 5060

element ip-address 172.20.10.243 5060

element ip-address 172.20.10.244 5060

element ip-address 172.20.10.245 5060

element ip-address 172.20.10.246 5060

element ip-address 172.20.10.247 5060

element ip-address 172.20.10.248 5060

element ip-address 172.20.10.249 5060

end server-group

element group sip group outbound.tt.tn netA

element ip-address 172.20.10.239 5060

end server-group

server group sip group default.tt.tn netA

element ip-address 172.20.10.35 5060

element ip-address 172.20.10.36 5060

element ip-address 172.20.10.37 5060

end server-group

route table cvp-route-table

key * response 404

key 1# target-destination default.tt.tn netA

key 2# target-destination cvp.tt.tn netA

key 3# target-destination gateways.tt.tn netA

key 4# target-destination outbound.tt.tn netA

end route table

SIP GATEWAY

----------------------------------------------

dial-peer voice 2 voip

session target ipv4:SIP-Proxy@IP

protocol sipv2

907
Views
0
Helpful
1
Replies
CreatePlease to create content